Watch the videos below to learn how to install the schluter kerdi line.
Kerdi line drain installation.
Directly against the wall so that the channel body support is in contact with the wall.
Kerdi drain line shall be connected to the waste line.
Step by step how to install a schluter kerdi line linear drain base.
The drain outlet is approximately 2 1 8 o c.
This design versatility ensures that kerdi line can complement any décor.
The beauty of a linear drain is that allows for shower floor tile options not possible w.
Available with 4 gr.
Brushed stainless steel frame and closed design grate brushed stainless steel frame and perforated grate frameless tileable covering support 4 23 32 120 mm.
3 4 a b c 35 mm 1 3 8 centre drain off centre drain.
Schlüter kerdi line is a unique linear drainage channel for installation with tile and stone and is available from 50 120 cm in length.
The schluter kerdi line is a low profile linear floor drain specifically designed for bonded waterproofing assemblies kerdi line can be installed adjacent to walls or at intermediate locations in showers wet rooms and other applications that require waterproofing and drainage.
Installation instructions for the use of kerdi drain in shower applications can be found in the schluter shower system installation handbook preparation after locating the correct position cut a hole in the substrate for the drain outlet and coupling to the waste line using the template provided.
Stainless steel construction ensures longevity against the corrosive effects of water.
Drain placement install kerdi line adjacent to a wall or in the middle of your floor it s completely up to you.
Kerdi line is installed adjacent to the wall cover plate optional the kerdi line fc creates a seamless look in applications where multiple drains are installed end to end.
How far from the wall is the kerdi line linear drain installed.
From the edge of the wall board.
Schluter kerdi line is a clean sleek shower drain that can be used to control water drainage at the edge of a shower floor or at intermediate points in larger applications.